pyunitx¶
A module for the first-class manipulation of physical quantities.
It is named pyunitx as a reference to the siunitx LaTeX package.
Most conversion factors come from this document from NIST. Most values of constants come from this list also from NIST.
When doing calculations using physical measurements, it’s all too easy to forget to account for units. This can result in problems when you find you’ve been adding kilograms to newtons and your calculation is off by a factor of ten.
This library uses the standard library decimal.Decimal for all calculations to avoid most floating-point calculation pitfalls. Values given for units are automatically converted so you can enter any value that constructor can take. Functionally, this means that float notation should be given as strings rather than float literals.
Illustrative Examples¶
How many meters does light travel in a millisecond?
>>> from pyunitx.time import seconds
>>> from pyunitx.constants import c
>>> (c * seconds("1e-3")).sig_figs(5)
2.9979E+5 m
What is that in feet?
>>> from pyunitx.time import seconds
>>> from pyunitx.constants import c
>>> (c * seconds("1e-3")).to_feet().sig_figs(5)
9.8357E+5 ft
Q. How fast is someone on the equator moving around the center of the earth?
>>> from pyunitx.time import days
>>> from pyunitx.constants import earth_radius
>>> from math import pi
>>> circumference = 2 * pi * earth_radius
>>> (circumference / days(1)).to_meters_per_second().sig_figs(3)
464 m s^-1
How fast is the earth orbiting the sun?
>>> from pyunitx.time import julian_years
>>> from pyunitx.length import au
>>> from math import pi
>>> circumference = 2 * pi * au(1)
>>> (circumference / julian_years(1)).to_kilometers_per_hour().sig_figs(3)
1.07E+5 km hr^-1
Q. What’s the mass of air in one of your car tires, if the inner radius is 6 inches, the outer radius is 12.5 inches, the width is 8 inches, and it’s filled to 42 psi? [1]
>>> from pyunitx.length import inches
>>> from pyunitx.pressure import psi
>>> from pyunitx.constants import R, air_molar_mass
>>> from pyunitx.temperature import celsius, celsius_to_kelvin_absolute
>>> from math import pi
>>> volume = (pi * inches(8) * (inches("12.5") ** 2 - inches(6) ** 2)).to_meters_cubed()
>>> pressure = psi(42).to_pascals()
>>> temperature = celsius_to_kelvin_absolute(celsius(25))
>>> mols = pressure * volume / (R * temperature)
>>> mass = mols * air_molar_mass
>>> mass.to_pounds_mass().sig_figs(3)
0.369 lbm
All constants like R are defined in SI base units so you will need
to convert your units, but as you can see, that task is easy. It’s just
a matter of calling .to_<other unit>(). You can convert from any
unit to another that measures the same dimension this way. If you’re
going to a composite unit that hasn’t been explicitly declared with a
name, this is still possible, and the library will create a converter
for you - you just need to get the name right. The name format is as
intuitive as possible, as you can see with the above examples.
A name is made of the names of the base units, suffixed with
_squared, _cubed, etc. to relate the size of the exponent and
prefixed by per_ if the exponent is negative. Units with negative
exponents are made singular [2] to follow how you would say it.
Some examples of the most complicated possible situations will be illustrative.
>>> from pyunitx.constants import gas_constant, stefan_boltzmann
>>> print(gas_constant.to_feet_pounds_per_mole_per_rankine().sig_figs(4))
3.407 ft^2 slug mol^-1 °R^-1 s^-2
>>> print(stefan_boltzmann.to_horsepower_per_feet_squared_per_rankine_to_the_fourth().sig_figs(5))
3.7013E-10 slug s^-3 °R^-4
You will notice that the output will have all units broken down to their bases. It is guaranteed to be equivalent.
Now what happens if a calculation results in a predefined unit, like how newtons times meters equals joules?
>>> from pyunitx.voltage import volts
>>> from pyunitx.resistance import ohms
>>> print(volts(2) / ohms(100))
0.02 A
Calculations check their result against all the units that have been specially defined to find a match. However, if you end up with a result that could be broken into some product of complex units (like newton-seconds) this library will not do that for you and instead display it in its basest components. This is because the number of possible options is large and it’s not possible to figure out what you want.
This library predefines all the SI units and dimensions, as well as a bunch of US Customary units, but what if that’s not enough? You might want to model some other quantity, like cash flow in your budget.
>>> from pyunitx import make_dimension, make_unit
>>> from pyunitx.time import days
>>> Money = make_dimension('Money')
>>> dollars = make_unit(name="dollars", abbrev="$", dimension=Money, scale=1)
>>> euros = make_unit(name="euros", abbrev="€", dimension=Money, scale="0.98019")
>>> (dollars(150) / days(7)).to_euros_per_year().sig_figs(6)
7984.80 € yr^-1
For more examples, including derived units, see the definitions in the package, like energy or time.
uconvert¶
This package also comes with a command-line tool to perform unit conversions between any predefined units.
Q. What’s the conversion factor between kilowatts and foot-pounds per second?
$ uconvert 1 kW ft.lb/s
737.562 ft^2 slug s^-3
What’s my cat’s weight in pounds, rounded to 3 significant figures?
$ uconvert -f 3 4.9 kg lbm
10.8 lbm
Resistor color code converter¶
In the resistance module there is a function to construct a
resistance from a color code.
What’s the value of a resistor reading “orange, violet, red, silver”?
>>> from pyunitx.resistance import from_color
>>> from_color("OVRS")
3700 Ω
I want to know the tolerance on that same resistor.
>>> from pyunitx.resistance import from_color
>>> from_color("OVRS", include_tol=True)
(3700 Ω, 370.0 Ω)
Q. What’s the full specification of a six-band resistor reading “green, blue, blue, orange, brown, red”?
>>> from pyunitx.resistance import from_color
>>> from_color("EUUOBR", include_coeff=True)
(566000 Ω, 5660.00 Ω, 28.30000 m^2 kg K^-1 A^-2 s^-3)
Note: that last quantity is ohms per kelvin. As above, it gets decomposed into its base units due to not being a named derived unit.
For the mapping between letter and color, see the documentation. Because the starting letter of the colors are not unique (black, brown, and blue, as well as green, gray, and gold) the letter chosen to represent it isn’t perfectly intuitive. If you want your code to be more readable, all the colors are defined in an enum that you can use directly.
>>> from pyunitx.resistance import from_color, Color
>>> from_color([Color.ORANGE, Color.VIOLET, Color.RED, Color.SILVER], include_tol=True)
(3700 Ω, 370.0 Ω)
There is also a companion command-line tool that outputs its values in a
human-readable format. It is installed as resistor alongside
uconvert.
$ resistor -c euuobr
566 kΩ + 28.3 Ω/K ± 5.66 kΩ
The full documentation can be found at ReadTheDocs.